Black Magic Filters®

WEARCOAT 44, is a two-component, aliphatic urethane coating that produces a tough, glossy, hard-wearing and chemically resistant surface. Abrasion-resistant and UV stable, and, will protect and beautify a variety of interior and exterior substrates. If necessary, a range of textured aggregates is available to provide a traction enhanced surface. Resistant to U.V. Radiation providing excellent stability and color retention. OUTSTANDING FEATURES: Can be used over concrete, wood, masonry, vinyl, steel and other approved surfaces Produces a fully adhered, seamless, high density, urethane coating Protects your investment by increasing the effective service life of the substrate Is dustproof, and salt & chemical resistant May be applied by brush, roller or airless spray Resists penetration by oils, fuels and process fluids Sets quickly and develops strength rapidly Accommodates tire mounted vehicular traffic and eliminates bonding to paints Scrubbable and easy to clean Provides long term resistance to wear and abrasion Ideal for horizontal, pitched and vertical surfaces 26 standard colors to choose from! Custom colors are also available Also available in a clear formula Warrantied for 5 years SPECIFICATIONS: Coating Type: Two-part aliphatic urethane VOC: 450 gms/liter Pot Life: 3 hours at 70°F (50% R.H.) Shelf Life: 12 months Recommended Thickness: 4 mils dry film thickness Coverage: 2 coats at 400 square feet/gallon per coat Packaging: 1 gallon and 5 gallon pails Color: A variety of standard and custom colors APPLICATION: Caution! READ THIS ENTIRE DATA SHEET BEFORE CONTINUING. All surfaces to be coated must be clean, dry and completely free of oil, grease, dust and any other substance that may interfere with proper bond. Add Part B color concentrate to the clear Part A and stir thoroughly for 3 minutes. WEARCOAT 44, may be applied by brush, roller or airless spray technique. Apply at a rate of 400 square feet per gallon per coat. Care must be taken to avoid creating foam or trapping air which may result in pinholes or hazing. Tools and equipment may be cleaned with xylene.