Black Magic Filters®

CLEARCOAT 44 is a single component, moisture cure, aliphatic clear urethane coating. It produces a tough, glossy, hard wearing and chemically resistant surface. CLEARCOAT 44 may be used alone as a clear, tough gloss coat over masonry, concrete, vinyl, wood, or other approved substrates. If specified, a range of textured aggregates is available to provide a traction enhanced surface. CLEARCOAT 44 was tested for conformance to industrial standards to meet the approval of the sealant waterproofing and restoration institute (SWR Institute). This product was validated using third party verification to certify that it performed above industry standards. CLEARCOAT 44 is also used over bright metal surfaces to maintain their appearance and prevent tarnishing Outstanding Features: •May be used over concrete, wood, masonry, vinyl, bright metals and other approved surfaces •Produces a fully adhered, seamless, high density, clear urethane coating •Protects your investment by increasing the effective service life of the substrate •Reduces dusting and is salt & chemical resistant •May be applied by brush, roller or airless spray •Resists penetration by oils, fuels and process fluids •Sets quickly and develops strength rapidly •Accommodates rubber tire mounted vehicular traffic •Scrubbable and easy to clean •Provides long term resistance to wear and abrasion •Ideal for horizontal, pitched and vertical surfaces •Remains tough and flexible at low temperatures •Single component formula means no measuring or mixing •Warrantied for 5 years SPECIFICATIONS: Coating Type: Aliphatic urethane VOC: 450 gms/liter Pot Life: 3 hours at 70°F (50% R.H.) Shelf Life: 12 months Recommended Thickness: 4 mils dry film thickness Coverage: 2 coats at 400 square feet/gallon per coat Packaging: 1 gallon and 5 gallon pails Color: A variety of standard and custom colors APPLICATION: Caution! READ THIS ENTIRE DATA SHEET BEFORE CONTINUING. All surfaces to be coated must be clean, dry and completely free of oil, grease, dust and any other substance that may interfere with proper bond. Add Part B color concentrate to the clear Part A and stir thoroughly for 3 minutes. ClearCOAT 44, may be applied by brush, roller or airless spray technique. Apply at a rate of 400 square feet per gallon per coat. Care must be taken to avoid creating foam or trapping air which may result in pinholes or hazing.